|
 |
Products
Showroom |
 |
 |
CARBON |
|
| |
| |
| |
Essentials of Assembling and using the Mechanical
Seals
|
| 1, The radial skip of the equiment spinning
axle shall be 0.04mm. The axial flee shall not be 0.1mm |
| 2, Keep the seat for the sealed chamber chean
during the assembling, Clean the sealing fittings and cheak
for perfect sealing surface. Keep the sealed positions away
from the impurity and dust. |
| 3, Any stroke collision and knocking are strictly
forbidden to avoid the failure of the seals due to the damage
by above-mentioned rough operations. |
| 4, Put some clean mechanical oil on the faces
which are in contact with the seals for smooth assembling. |
| 5, Give a uniform force to the screws while
tightening them up during the assembling of the static ring
gland to ensure verticality of the ring surface to the axis
of the axle. |
| 6, Push the motional ring with your hand after
assembling to makeit possible to move freely on the axle and
elastic at a certain degree. |
| 7, Tum the spinning axle by the handwheel after
assembling to make sure that the axle spins with neither fatigue
nor extra ease. |
| 8, The equipment shall be filled with mediums
before it is put into operation so as to avoid the failure of
the seals due to dry friction. |
| 9, Correspondong measures, such as washing,
filtering and cooling shall be taken when the temperature of
the mediums that may be easily crystallized of granulated exceeds>80°C.
As to the other auxiliary systems, refer to relevant standards
on the mechanical seals. |
|
| |
| |
| |
| NINGBO
YINZHOU HUASHENG MECHANICAL SEALS MANUFACTURE |
| Address:ZhangHuaShan, Jiangshan Town,
Yinzhou Districl, Ningbo City, Zhejiang Province, China |
| Tel:0086-574-88457658 |
OVERSEA DEPT |
| Fax:0086-574-88070296 |
Tel:0086-0574-87339961 |
| Web Site:http://www.hsseals.com |
Fax:0086-0574-87338119 |
| E-mail:sales@hsseals.com |
E-mail:hs@hsseals.com |
|
| |
|
